Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M12-1.75, 45mm Length (Pack of 50)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M12-1.75, 45mm Length (Pack of 50) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M12-1.75, 45mm Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #8-32, 1" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Flat Point, M5-0.8, 6mm Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M2.5-0.45, 12mm Length (Pack of 50)
• Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M4-0.7, 12mm Length (Pack of 25)
• Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M6-1, 20mm Length (Pack of 10)

Detail Reviews

Jul 01, 2011 08:07:04

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 7/8" Length (Pack of 100)

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 7/8" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 7/8" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Nylon 6/6 Set Screw, Slotted Drive, #2-56, 1/16" Length (Pack of 100)
• Nylon 6/6 Set Screw, Recessed Slotted Drive, #6-32, 3/32" Length (Pack of 100)
• -117 EPDM O-Ring, 70A Durometer, Black, 13/16" ID, 1" OD, 3/32" Width (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)

Detail Reviews

Jun 30, 2011 11:55:03

Coarse Thread Socket Set Screw Flat Point Plain 4-40 X 3/16 (Pack of 100)

Coarse Thread Socket Set Screw Flat Point Plain 4-40 X 3/16 (Pack of 100) Reviews

Other Picture

Coarse Thread Socket Set Screw Flat Point Plain 4-40 X 3/16 (Pack of 100)

Visit Store Now !!

Detail Products

Detail Reviews

Jun 28, 2011 21:31:08

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 3/8"-16, 5/8" Length (Pack of 25)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 3/8"-16, 5/8" Length (Pack of 25) Reviews

Other Picture

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 3/8"-16, 5/8" Length (Pack of 25) Feature

• Set Screws keep parts from turning relative to a shaft
• Black Oxide coating helps reduce friction and provides mild corrosion resistance
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 27, 2011 15:47:05

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-40, 5/16" Length (Pack of 100)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-40, 5/16" Length (Pack of 100) Reviews

Other Picture

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-40, 5/16" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, 5/16"-18, 1-1/2" Length (Pack of 25)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-20, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #8-32, 1/2" Length (Pack of 10)

Detail Reviews

Jun 26, 2011 17:56:07

Value 533240P M16x2x16 Met Cup Pt Socket Set Scr

Value 533240P M16x2x16 Met Cup Pt Socket Set Scr Reviews

Other Picture

Value 533240P M16x2x16 Met Cup Pt Socket Set Scr Feature

• Package Quantity: (1) Piece
• Type: Socket Set Screws
• Point Type: Cup
• Thread Size: M16x2
• Length (mm): 16.00mm
• Material: Alloy Steel
• Material Grade: R/C 45-53
• Key Size (mm): 8.000
• Finish/Coating: Black Oxide

Metric Socket Set Screws - Alloy Steel Type: Socket Set Screws Point Type: Cup Thread Size: M16x2 Length: 16.00 mm Material: Alloy Steel Key Size: 8.000 mm Finish/Coating: Black Oxide

Visit Store Now !!

Detail Products

Detail Reviews

Jun 25, 2011 19:37:04

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #6-32, 7/8" Length (Pack of 10)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #6-32, 7/8" Length (Pack of 10) Reviews

Other Picture

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, #6-32, 7/8" Length (Pack of 10) Feature

• Set Screws keep parts from turning relative to a shaft
• Black Oxide coating helps reduce friction and provides mild corrosion resistance
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 1/4"-28, 1/4" Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-24, 1-3/4" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, Nylon Patch, #8-32, 1/2" Length (Pack of 10)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)

Detail Reviews

Jun 24, 2011 16:25:04

Coarse Thread Socket Set Screw Cup Plain 3/8-16 X 5/16 (Pack of 100)

Coarse Thread Socket Set Screw Cup Plain 3/8-16 X 5/16 (Pack of 100) Reviews

Other Picture

Coarse Thread Socket Set Screw Cup Plain 3/8-16 X 5/16 (Pack of 100)

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 13:59:04

Nylon Set Screw, Slotted Drive, #6-40, 1/4" Length (Pack of 50)

Nylon Set Screw, Slotted Drive, #6-40, 1/4" Length (Pack of 50) Reviews

Other Picture

Nylon Set Screw, Slotted Drive, #6-40, 1/4" Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #8-32, 1/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #5-40, 1/2" Length (Pack of 100)
• Nylon Set Screw, Recessed Slotted Drive, #8-32, 7/16" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Hex Head, #6-32, 3/16" Length (Pack of 100)

Detail Reviews

Jun 20, 2011 15:45:04

Coarse Thread Socket Set Screw Cup Plain 5/16-18 X 7/8 (Pack of 100)

Coarse Thread Socket Set Screw Cup Plain 5/16-18 X 7/8 (Pack of 100) Reviews

Other Picture

Coarse Thread Socket Set Screw Cup Plain 5/16-18 X 7/8 (Pack of 100)

Visit Store Now !!

Detail Products

Detail Reviews

Jun 19, 2011 17:02:04

5/16-18 Thd., 5/16 Lg., Brass Tipped Hex Socket Set Screws (1 Each)

5/16-18 Thd., 5/16 Lg., Brass Tipped Hex Socket Set Screws (1 Each) Reviews

Other Picture

Brass and Nylon Tipped Hex Socket Set Screws - Inch - Steel CAD drawing for this part is available on our website.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 15:03:04

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100)

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Slotted Drive, Flat Point, #4-40, 1-1/4" Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Nylon 6/6 Set Screw, Slotted Drive, #2-56, 1/16" Length (Pack of 100)
• Nylon Set Screw, Recessed Slotted Drive, #8-32, 7/16" Length (Pack of 50)
• -012 EPDM O-Ring, 70A Durometer, Black, 3/8" ID, 1/2" OD, 1/16" Width (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)

Detail Reviews

Jun 17, 2011 09:14:04

Nylon 6/6 Set Screw, Recessed Slotted Drive, M5-0.8, 8mm Length (Pack of 100)

Nylon 6/6 Set Screw, Recessed Slotted Drive, M5-0.8, 8mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Set Screw, Recessed Slotted Drive, M5-0.8, 8mm Length (Pack of 100) Feature

• Set Screws keep parts from turning relative to a shaft
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Do not have an external head
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 5/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 2" Length (Pack of 10)

Detail Reviews

Jun 15, 2011 13:07:04