Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/4" Length (Pack of 10)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/4" Length (Pack of 10) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 3/8"-16, 3/4" Length (Pack of 10) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 31, 2011 15:54:03
0 comments
Labels: , , , , ,

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, #8-32, 1/2" Length (Pack of 10)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, #8-32, 1/2" Length (Pack of 10) Reviews



Other Picture


Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, #8-32, 1/2" Length (Pack of 10) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Black Oxide coating helps reduce friction and provides mild corrosion resistance
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 30, 2011 06:07:10
0 comments
Labels: , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 12mm Length (Pack of 25)

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 12mm Length (Pack of 25) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 12mm Length (Pack of 25) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Also known as oval cup, the round tip of the Knurled Cup Point minimizes deformation of the contact surface, and is ideal for applications requiring frequent adjustments.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 29, 2011 10:33:04
0 comments
Labels: , , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M10-1.5, 30mm Length (Pack of 10)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M10-1.5, 30mm Length (Pack of 10) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Cup Point, M10-1.5, 30mm Length (Pack of 10) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 27, 2011 16:00:06
0 comments
Labels: , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-24, 3/4" Length (Pack of 25)

Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-24, 3/4" Length (Pack of 25) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Cup Point, 5/16"-24, 3/4" Length (Pack of 25) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 26, 2011 15:09:10
0 comments
Labels: , , , , ,

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 10)

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 10) Reviews



Other Picture


Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 3/4" Length (Pack of 10) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 25, 2011 15:05:09
0 comments
Labels: , , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 6mm Length (Pack of 5)

Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 6mm Length (Pack of 5) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Knurled Cup Point, M5-0.8, 6mm Length (Pack of 5) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Also known as oval cup, the round tip of the Knurled Cup Point minimizes deformation of the contact surface, and is ideal for applications requiring frequent adjustments.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 24, 2011 11:53:04
0 comments
Labels: , , , , , ,

5-.80X10 Metric Socket Set Screw (100 count)

5-.80X10 Metric Socket Set Screw (100 count) Reviews



Other Picture


5-.80X10 Metric Socket Set Screw


Visit Store Now !!

Detail Products

Detail Reviews




Mar 21, 2011 18:57:07
0 comments
Labels: , , ,

Nylon Set Screw, Slotted Drive, Flat Point, #10-32, 1/8" Length (Pack of 50)

Nylon Set Screw, Slotted Drive, Flat Point, #10-32, 1/8" Length (Pack of 50) Reviews



Other Picture


Nylon Set Screw, Slotted Drive, Flat Point, #10-32, 1/8" Length (Pack of 50) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
  • Do not have an external head
  • Driven by a flat-bladed driver
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 20, 2011 12:04:03
0 comments
Labels: , , , , ,

Nylon Set Screw, Slotted Drive, 1/4"-20, 1/2" Length (Pack of 100)

Nylon Set Screw, Slotted Drive, 1/4"-20, 1/2" Length (Pack of 100) Reviews



Other Picture


Nylon Set Screw, Slotted Drive, 1/4"-20, 1/2" Length (Pack of 100) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
  • Do not have an external head
  • Driven by a flat-bladed driver
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 19, 2011 07:41:06
0 comments
Labels: , , , ,

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/2"-13, 1/2" Length (Pack of 50)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/2"-13, 1/2" Length (Pack of 50) Reviews



Other Picture


Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, 1/2"-13, 1/2" Length (Pack of 50) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Black Oxide coating helps reduce friction and provides mild corrosion resistance
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Flat Points are useful for minimizing marring and are good for making frequent adjustments.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 18, 2011 03:19:03
0 comments
Labels: , , , , ,

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/4"-28, 1-1/4" Length (Pack of 50)

Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/4"-28, 1-1/4" Length (Pack of 50) Reviews



Other Picture


Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 1/4"-28, 1-1/4" Length (Pack of 50) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Black Oxide coating helps reduce friction and provides mild corrosion resistance
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

The Black Oxide coating provides some lubricity to the product, meaning that there is less friction generated when using these products. The coating also provides a mild corrosion resistance, but should not be relied on in environments where corrosion resistance is a primary concern.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 16, 2011 02:34:04
0 comments
Labels: , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 35mm Length (Pack of 5)

Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 35mm Length (Pack of 5) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, Cone Point, M10-1.5, 35mm Length (Pack of 5) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Good for permanent setting of parts, the sharp point of the Cone penetrates deep into the surface to lock in place.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 13, 2011 18:05:18
0 comments
Labels: , , , , ,